* show site building

Heights are (approx.) 4m overall height but may be dependant on planning permission/ building regulations. Please check.

Extra height Cedral buildings include:

• Installation to your firm/level base.
• CLS 90x38mm (actual)/ 100x50mm (nominal) pressure treated C16 graded timber framing.
• 12mm sheathing plyboard to CLS.
• Breathable membrane.
• 34x45mm (actual)/ 38x50mm (nominal) pressure treated timber batten for Cedral weatherboard.
• Marley Cedral weatherboard (stock colours).
• All Marley trims and vents
• Torch-on felt – green, red or black
• 1 no pair uPVC white French doors - 1500mm wide x 2000 high, 4/20/4 clear tuf Low E units
• 2 no uPVC white fixed side lights 4/20/4 clear tuf Low E units.
• Black half round guttering and downpipes
• *70mm PIR insulation board to walls and ceiling with tongue and groove, v-joint clad whitewood OR 12.5mm plasterboard finished (tape and fill) ready to decorate
• Approx U-value 0.25 w/m²K
• 20mm PIR insulation board to floor between two floor boards

Optional

• Anthracite/black/rosewood instead of standard white, add £150.00 per unit.
• uPVC white 2000mm high x 800mm wide fully-glazed single door, add £720.00 Colour add extra £150.00
• Security high level uPVC white top-hung window 1000mm high x 400mm wide, add £295.00 Colour add extra £150.00
• Standard electrics package (guide):
• Air con
• Free foam soffit and fascia instead of Cedral board. Available in white/woodgrain/black/brown/grey.
• Bases - Concrete, platform or leveling base
• Mezzanine floor, stairs and balustrade – POA
• Also available in softwood, pressure treated cladding (externally) (shiplap, loglap, heavy duty featheredge or vertical tongue and groove v-joint) - POA

ALL PRICES INCLUSIVE OF V.A.T.